The main products are metal fibers of various materials, twisted yarns and blended yarns.
The metal fibers is made by Huitong's bundle drawing process which is independently developed and domestically leading manufacturing technology. We can produce more than 500 tons of metal fibers annually with diameters of 1-100μm, various materials, filaments and other technical requirements. They are widely used in environmental protection, automobiles, textiles, petroleum, chemicals, communications and other fields.
Ultra-fine Metal Fiber Composite Wire is made of single or multiple strands of continuous metal fibers by twisting into flexible wires with stable resistivity, good high temperature resistance and conductivity. It can be used for anti-static brushes, high temperature resistant sewing threads, signal transmission wires, conductive transmission wires and heating wires, etc.
Metal fiber blended yarn, also called conductive blended yarn, is made of metal fiber blended with chemical fiber, cotton or viscose fiber,it can be used for anti-static and anti-electromagnetic radiation, etc.

The main products are metal fiber conductive plastics and metal fiber coated heating wires.
Metal fiber conductive plastics are made by blending stainless steel fibers and resins, which make the polymer matrix material have conductive and electromagnetic shielding properties. They can be used to produce plastic products such as PVC, PP, PA, PC, TPU, PE and ABS, and are used in the fields of electronics and electrical applications.
Metal fiber coated heating wires are made of single or multiple strands of ultra-fine metal fiber wires twisted into flexible wires with good conductivity, high strength, high elasticity, wear resistance, corrosion resistance and oxidation resistance. They are mainly used in smart heating clothing, heating pads, car seat heating, car steering wheel heating, etc.

The main products are metal fiber sintered felts and metal fiber web by various metal fiber materials.
Stainless steel fiber felt is made of stainless steel fiber after air laying,vacuum sintering and post treatment process.It has three dimensional labyrinth structure with excellent high porosity. Stainless steel fiber felt is a new type of filter material with excellent permeability, high specific surface area and porosity, high solid particle capture rate and high contaminant holding capacity.Low pressure drop increasing the on-stream lifetime of your element. Moreover, the filter elements can be easily cleaned off-line to be reused.It is mainly used for impurity filtration in chemical industry, polyester film and other industries.
Titanium fiber felt is made of micron-level pure titanium fiber through a special non-woven laying process and ultra-high temperature vacuum sintering process.It has an excellent three-dimensional network porous structure, high porosity, much larger surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, and perfect heat dissipation performance, high current density, low voltage, stable performance, long life and so on. It is mainly used in fuel cell and proton exchange membrane (PEM) water electrolysis.
Iron-chromiumaluminum（FeCrAl) fiber felt is made of Iron-chromium-aluminum（FeCrAl) fiber as raw material. It is a metal fiber felt with long service life, high temperature resistance, deformation resistance, good toughness, foldability and uniform pore size distribution. It is mainly used in diesel vehicle exhaust treatment, gas boilers, glass heat processing, food baking, drying industry and other fields.
Metal fiber web is made of metal fibers with uniform diameter through air-laying. It has the advantages of high uniform structure, wide range of fiber weights and diameters, consistent fiber diameter, ultra-high porosity, etc. The material can be stainless steel, Iron-chromium-aluminum（FeCrAl) alloy and Hastelloy, etc. It is mainly used in gas-liquid separation, gas-solid separation and other industries.

The main products are metal fiber burners and pure metal fiber fabrics.
The Metal fiber burner is made of pure metal fiber fabric. It can withstand high temperatures of 1,100°C(upper temperature limit 1,250°C), achieve extremely low NOx and CO emissions and wide frequency regulation. It is mainly used in civilian wall-mounted boilers, kitchen equipment, commercial boilers and steam generators, etc.
Pure metal fiber fabric is made of 100% metal fiber and has the characteristics of corrosion resistance, high temperature resistance, high elasticity, and good softness. It's used in high temperature working environments such as metal fiber surface combustion.